\\ Post Your Car vol. Been a minute //

Put a dash cam in last month and finally found something quasi-interesting to share, as I know there are a lot of GT-R fans here.

At the light the driver of the 328i was star-struck as he was gushing to the driver of the GT-R. Based on what I could tell and the way he drove, the 328i driver looked like he was either in high school or just out of it, with some buddies in the car which I'm sure didn't help. He spent most of the drive ticking me off as he kept wanting to get close to the GT-R before realizing his turn was coming up so he had to squeeze in front of me.

The GT-R was nice, but I just wanted to get to where I was going. I took the audio out to remove any inadvertent commentary from me 
laugh.gif
.

 
 
 
Pretty damn happy with the fitment of the wheels. Specs turned out to be perfect. I can't ******* believe they don't rub at all. And i took some corners pretty hard too, still no rubs.

running a 12.5mm spacer in the front because the tires were hitting the springs and it's the smallest i had, might order like a 8mm or 10mm to put on but i don't think the 12.5 looks bad at all
Told you it would fit with spacers punk 
laugh.gif


I'd leave it just like the buddy looks awesome.
 
 
Pretty damn happy with the fitment of the wheels. Specs turned out to be perfect. I can't ******* believe they don't rub at all. And i took some corners pretty hard too, still no rubs.




running a 12.5mm spacer in the front because the tires were hitting the springs and it's the smallest i had, might order like a 8mm or 10mm to put on but i don't think the 12.5 looks bad at all

Told you it would fit with spacers punk :lol

I'd leave it just like the buddy looks awesome.
:lol
 
 
Pretty damn happy with the fitment of the wheels. Specs turned out to be perfect. I can't ******* believe they don't rub at all. And i took some corners pretty hard too, still no rubs.




running a 12.5mm spacer in the front because the tires were hitting the springs and it's the smallest i had, might order like a 8mm or 10mm to put on but i don't think the 12.5 looks bad at all

Told you it would fit with spacers punk :lol

I'd leave it just like the buddy looks awesome.

Son, it was the rear I was worried about rubbing the inside and didn't wanna have to run spacers, because the specs are so perfect on them.

The fronts, I was considering running spacers all along once I test fitted them because they weren't as flush as the rear. So it worked out!
 
Last edited:
Just got most of the parts needed for this repair. Me and the family mechanic are gonna try and tackle this issue today. Hopefully there's not much more damage than when he first inspected the car. Wish us luck




Put a dash cam in last month and finally found something quasi-interesting to share, as I know there are a lot of GT-R fans here.

At the light the driver of the 328i was star-struck as he was gushing to the driver of the GT-R. Based on what I could tell and the way he drove, the 328i driver looked like he was either in high school or just out of it, with some buddies in the car which I'm sure didn't help. He spent most of the drive ticking me off as he kept wanting to get close to the GT-R before realizing his turn was coming up so he had to squeeze in front of me.

The GT-R was nice, but I just wanted to get to where I was going. I took the audio out to remove any inadvertent commentary from me :lol .






 
the landscaping and architecture looks very familiar, South Florida?
 
Just got most of the parts needed for this repair. Me and the family mechanic are gonna try and tackle this issue today. Hopefully there's not much more damage than when he first inspected the car. Wish us luck
the landscaping and architecture looks very familiar, South Florida?
This was in Jacksonville, FL.

I followed a Sequoia today from HGreg.com. I hadn't heard of that site until I read this thread.
 
Thanks man.  Im probably going to raise the back a hair to make it more even with the front but I'm gonna wait for the new springs to settle first.  The lip is definitely needed
 
Last edited:
Thanks man.  Im probably going to raise the back a hair to make it more even with the front but I'm gonna wait for the new springs to settle first.  The lip is definitely needed

Ride height looks fine! That rear quarter shot is so mean, nicely done Nelson.

What's the specs on those BBS? 19x10?
 
 
Thanks man.  Im probably going to raise the back a hair to make it more even with the front but I'm gonna wait for the new springs to settle first.  The lip is definitely needed
I really want to lower my front so its even with the rear but my lip will be toast then 
laugh.gif
 
Back
Top Bottom