\\ Post Your Car vol. Been a minute //

Got the car back a few hours ago. No visible anti-freeze leak. My guy said it may just be that the port connected to the reservoir sensed extra liquid & pee'd it out through a drain. The anti-freeze I added in 9 days ago has remained at the same level since & nothings leaked out thankfully.

Oil change is 👍 & about the stalling due to the tuning issue the tuner has been on vacation so he didn't get a chance to look at my car. Jim said once he gets back in he'll pull up my tune file tweak it for the AR's in between 1st & 2nd gear & send it to my Diablo for me to upload to my car. Now we wait. I'm going to be taking the car Upstate to Lake George in couple of weeks so hopefully I get an updated tune before that.
 
I got to walk around today. There is a red LFA inside too.
Here is me next to the chief designer of the Lexus concept

51992826-D703-466E-9DFB-1F00E782D21E.jpeg

Ahhhh. I did see you. I was trying to figure out which one you were. There were some dudes rocking some heat that night. I was the guy in the Undefeated 97s
 
Finally got my Model Y back. Figured I mess around with it and do something I haven’t seen anyone else do.

Two tone brakes (never seen it done before aside from the Italian flag stuff) but also have never seen anyone do this particular color.

Toyota Quick Sand from the TRD Pros since it’s a Toyota.

Still not lowered yet but I have the springs, will get to it eventually.

F6D2485F-0741-4666-8BE1-FB1B45EB66F7.jpeg

9092A749-3621-480A-B9D8-95E3EC4287AB.jpeg

C8C02BB5-60A1-422B-B692-45BC91FF58F9.jpeg

EB9FC0CA-1569-4BAD-9593-6CB771320206.jpeg

7F6D4DCF-A4DA-48D2-ADB6-9C0B24CF9B38.jpeg

84CC94A4-146F-47C8-B905-3B41689C83D9.jpeg
 
Last edited:
Finally got my Model Y back. Figured I mess around with it and do something I haven’t seen anyone else do.

Two tone brakes (never seen it done before aside from the Italian flag stuff) but also have never seen anyone do this particular color.

Toyota Quick Sand from the TRD Pros since it’s a Toyota.

Still not lowered yet but I have the springs, will get to it eventually.

F6D2485F-0741-4666-8BE1-FB1B45EB66F7.jpeg

9092A749-3621-480A-B9D8-95E3EC4287AB.jpeg

C8C02BB5-60A1-422B-B692-45BC91FF58F9.jpeg

EB9FC0CA-1569-4BAD-9593-6CB771320206.jpeg

7F6D4DCF-A4DA-48D2-ADB6-9C0B24CF9B38.jpeg

84CC94A4-146F-47C8-B905-3B41689C83D9.jpeg
Very nice fam. Excellent choice.
 
Got the car back a few hours ago. No visible anti-freeze leak. My guy said it may just be that the port connected to the reservoir sensed extra liquid & pee'd it out through a drain. The anti-freeze I added in 9 days ago has remained at the same level since & nothings leaked out thankfully.

Oil change is 👍 & about the stalling due to the tuning issue the tuner has been on vacation so he didn't get a chance to look at my car. Jim said once he gets back in he'll pull up my tune file tweak it for the AR's in between 1st & 2nd gear & send it to my Diablo for me to upload to my car. Now we wait. I'm going to be taking the car Upstate to Lake George in couple of weeks so hopefully I get an updated tune before that.

I'm legit 😃 from 👂 to 👂 knowing that your car is on the mend
 
Finally got my Model Y back. Figured I mess around with it and do something I haven’t seen anyone else do.

Two tone brakes (never seen it done before aside from the Italian flag stuff) but also have never seen anyone do this particular color.

Toyota Quick Sand from the TRD Pros since it’s a Toyota.

Still not lowered yet but I have the springs, will get to it eventually.

F6D2485F-0741-4666-8BE1-FB1B45EB66F7.jpeg

9092A749-3621-480A-B9D8-95E3EC4287AB.jpeg

C8C02BB5-60A1-422B-B692-45BC91FF58F9.jpeg

EB9FC0CA-1569-4BAD-9593-6CB771320206.jpeg

7F6D4DCF-A4DA-48D2-ADB6-9C0B24CF9B38.jpeg

84CC94A4-146F-47C8-B905-3B41689C83D9.jpeg
I'm liking the 2 tone touches. Looks really good 🔥
I'm legit 😃 from 👂 to 👂 knowing that your car is on the mend
Thanks brother. She is healthy & nearly back to 100%, just need them to send me the new tune asap & then it'll be perfect. If I have the energy later today I'm going to wash it. Already vacuumed it during my break at work. Seems It sat outside for the week that it was there & is pretty filthy which I hate, lol.
 



Hood looks better than the GT3 hood, which I still pretty much hate to this day. Probably the only thing on the GT3 that just looks awful to me whereaa everything else is perfect. I like this RS model, its A LOT but looks good. Last gen looks a lot better though (RS model).
 
Looks like a Pagani clone with some tweaks

This looks NOTHING like a Pagani. The seating position in the car is F1. You lay back and your hips are equal to your feet at the pedals. This is as close of a F1 car for the street that there will ever be. The seat bottom you actually have to step on to get in (seats are fitted to the driver by AM in the UK). And the cockpit is a F1 style tub. The guy from Red Bull Adrian Newey did all the aero for it.

On the street, it looks insane. I love the Huayra, but this is on a totally different level. Plus having a Cosworth made V12 that revs to 11,100 doesn't hurt either! 👍👍
 
I got to walk around today. There is a red LFA inside too.
Here is me next to the chief designer of the Lexus concept

51992826-D703-466E-9DFB-1F00E782D21E.jpeg

hey Mike,

my mom has been carless for a few years and I want to get her a new car. She wanted a rav4 prime but I think I would rather get her the NX450h+. I called around and there’s only 8 F-Sports in the entire country.

I got in line at a local dealer that charges MSRP and I’m 211th on the list, you’d think I was talking about a corvette but nah lol. Do you think I should wait for the NX or move my deposit to the incoming RX450h+?

So jealous of everyone in Monterey
 
wear rare airs wear rare airs dope *** MY bro! Love the clean look. Is that xpel stealth wrap? Lookin to wrap mine in matte white and thinking of getting the xpel stealth over suntek. I want the most matte look. Here is current, not gonna do anything crazy after that
1661060358053.jpeg

Looks great, where are you located?

This is a wrap, I couldn’t justify the cost of doing XPEL because I wasn’t sure how long I’d have the car.

I would look into STEK brand PPF also since it has a ceramic coating already on the film permanently.

Suntek is fine, it’s not great and it’s not bad. Ultimately it’s all about budget when it comes to these things, but I have noticed that shops with more experience will not use Suntek products. Suntek is cheaper for shops, and precut for all panels of the car. Nothing wrong with that, but I had a precut XPEL installed on my 911 and probably would never go that route again.

Experienced shops use bulk film and maybe a precut for the bumper only, which allows them to tuck all the corners/edges.
 
Back
Top Bottom